Agatec 510 Laser

The 510 GC laser sets up fast, it's totally automatic in both horizontal and vertical modes. There are no leveling screws or vials to rough level. Just turn it on and it's ready to go! Most lasers have either scanning or chalk line, the 510S-GC has both. Oscillating beam intensifies laser line and is easier to see at longer distance. Two separate beams create a constant 90° angle. The 510 GC has features needed for installing acoustical ceilings, partitions, flooring, framing and more.

510 GC Self-Leveling Laser Features

Automatic self-leveling in both horizontal and vertical

·         No leveling screws or vials to adjust

·         No rough leveling required, as with lasers using pendulum compensators

·         No extra accessories needed for vertical

Integrated, all-in-one design

·         Wall mount is built into the laser; no need to carry and set up extra accessories

·         Slope mount also integrated into laser base; no separate grade mount needed for inclined planes. Match any two slope reference points from 1° to 90° in manual mode

 

Motorized wall mount

·         Use remote control with motorized mount to adjust height of the laser from a distance

·         Save time when changing from mold height to grid height or clearing low-hanging obstacles

·         In vertical position, remote moves laser back and forth for easy positioning over a point for layout and wall and partition installation

Electronic motorized leveling

·         Uses electronic vials and servo-motors to level

·         More rugged than delicate wire-hung compensators

·         Not affected by temperature variations

·         35X more leveling range than wore compensators

Both scanning and chalk line

·         scanning mode: concentrates beam in a defined work area: easier to see beam further away

·         Solid non-scanning chalk line: ideal for short distances

Electronic calibration

·         If required, laser is easy to calibrate by the user

 

Constant squaring

·         Split beam for 90° angles and vertical plumb

Left/right adjustable

·         Square shot or chalk line can be adjusted left or right with the remote control, detector, or laser keypad

Remote control capability

·         Use the detector or remote control to: stop, start, or change direction or laser rotation; move the square shot left or right; and control scanning and calibration

 

H. I. Alert

·         Shuts the laser off automatically if the laser is disturbed, preventing inaccurate readings

·         Known as "Height of Instrument Alert" or "Tilt"

·         Available 30 seconds after instrument has self-leveled

Long battery life

·         160 hours with 2D alkaline batteries (510S-GC)

·         40 hours with rechargeable battery pack (510S-GCR)

Exterior and Interior Applications

·         Horizontal and vertical self-leveling laser

·         Ideal for aligning and squaring tilt-up walls, partitions, decks, and foundations

·         Unique built-in motorized mount

·         Includes combination detector and remote laser control with rod clamp.